400ml epoxy chemical anchor for tropical weather used | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

400ml two part epoxy resin anchoring adhesive / Injectable chemical anchor factory establishes in Taiwan. With 25 years experience in producing injection mortar and export to over 40 countries.

400ml epoxy chemical anchor for tropical weather used - 400ml two part epoxy resin anchoring adhesive
  • 400ml epoxy chemical anchor for tropical weather used - 400ml two part epoxy resin anchoring adhesive

400ml epoxy chemical anchor for tropical weather used

GU-500 400ml 3:1

High Temperature Epoxy Anchoring Mortar

400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer.

Epoxy chemical anchor satisfy the demand for high strength, wide temperature range and nonstandard installation in mostly cases. Outstanding tension tested with anchors by Germany lab according to EAD 330499-00-0601. Epoxy injection mortar can be used indoors or unventilated areas. There is 585ml available in the range.

Chemical fixing system - Ultimate performance pure epoxy chemical anchor

High-end epoxy mortar for heavy anchoring and critical conditions. In variation case of anchoring work which required higher performance to satisfy and secure the anchoring in dry, wet, uncracked, cracked concrete even in seismic conditions or temperature variation and installation limitation. We tested diverse anchoring condition in ETAG approval lab and with report to compare. Epoxy injectable adhesive anchor is strongest one of bonding fasteners which is growing demands.

Specification of Pure epoxy chemical anchor

● Material: Pure Epoxy
● Model Number: GU-500
● Capacity: 400ml
● Mixing Ratio: 3:1
● Mixed Color: Orange
● Shelf Life: 18 months
● Standard Package: One cartridge with one mixer
● Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Pure epoxy chemical anchor provides longer working time

● Performance testing by ETAG qualified lab according to EAD 330499-00-0601
● Ultimate bonded strength for wide-ranging high performance requests or particular conditions
● Good chemical resistance and better for high and low temperature
● Ideal for deep embedment
● Longer working time and no shrinkage
● Orange color for easy monitoring
● Styrene free, low odor and LEED tested for VOC (Volatile Organic Compounds)
● No health or safety concern to slow down your work

Epoxy anchoring for wall extension, building facades, beam to column connection

High strength epoxy anchoring adhesive can be dispensed at cold and warm temperature. Extensive use in most high strength request for anchoring from new building to old, retrofit or remodel the structure, connect new extension and strengthen present beam. Chemical anchoring is efficient and fast way for strengthening. For large project of dam, bridge, highway, tunnel which is required to use superior epoxy for structural reinforcement.

Injection epoxy mortar for durable and secure anchoring

Non-drip formula, ideal for overhead installation and suspension anchorage. Versatile and multi-purpose pure epoxy is longer curing time and more flexible on applications. As global warming, climate suitability and wide temperature applicability are important for chemical anchor development. We equip temperature facilities to simulate different anchoring temperature worldwide and do multiple testing to ensure the quality. The steady characteristic of epoxy is most used in tropical zone.

How To Use Chemical Anchor Caulking Gun?

1. There is a small trigger on the back of the caulking gun. Press the release trigger with your thumb. This will loosen the long steel rod that runs through the entirety of the frame. 2. Pull the plunger all the way back. 3. Remove the white cap and plug of tube and then screw the mixer nozzle on to the tube. Insert the flat end of the tube into the back of the gun first and put the tube with the mixer nozzle in the front. Pull the handle trigger to move the plungers of caulking gun. Make sure that the plungers of caulking gun are in the center of tube pistons. It is very important to put the tube in the correct position.

All Good Use chemical anchors qualified by IWB lab in Germany and CSTB lab in France

There is no authorized lab for testing bonding anchor in Asia under European Technical Assessment (ETA) regulations. All our chemical anchors are tested according to EAD 330087-01-6001 and EAD 330499-00-0601 for fastener of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.

Technical Data

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

Pressure Destroy Haul Strength
(Kgf/KN)
Safety Haul Strength
(Kgf/KN)
Working Standard
(mm)
Concrete Strength 4,000 psi 280 kg/cm2 4,000 psi 280 kg/cm2 Hole Diameter Hole Depth
Rebar No. #3 (Φ10) 3,607 36.4 1,202 12.1 13 90
#4 (Φ12) 6,409 64.7 2,136 21.6 16 125
#5 (Φ16) 9,695 97.9 3,232 32.6 20 145
#6 (Φ20) 13,655 137.9 4,552 46.0 25 170
#7 (Φ22) 18,672 188.6 6,224 62.9 28 200
#8 (Φ25) 24,032 242.7 8,011 80.9 32 225
#9 (Φ28) 27,364 276.4 9,121 92.1 37 260
#10 (Φ32) 31,730 320.5 10,577 106.8 40 290
#11 (Φ36) 35,843 362.1 11,948 120.7 42 320
Remarks: 1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C) Gelling Full Curing
5~10 1-2 hr. 90 - 100 hr.
10~20 30-60 min. 30 - 60 hr.
20~30 14-30 min. 14 - 22 hr.
30~40 10-20 min. 6 - 12 hr.
Please make pull off test for at least 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor Size Hole Diameter
(mm)
Hole Depth
(mm)
Number of Fixings
400ml
M8 10 80 80
M10 13 90 42
M12 16 120 21
M16 20 145 11
M20 25 170 6
M24 28 210 4
M30 35 270 2
M36 40 330 1
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.
Related Products
650ml epoxy anchoring adhesive for high temperature installation - 650ml two components pure epoxy summer epoxy adhesive
650ml epoxy anchoring adhesive for high temperature installation
GU-500 650ml 1:1

1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country. Two...

Details
Advanced epoxy chemical anchor for varying weather application - Epoxy anchor for different climate conditions
Advanced epoxy chemical anchor for varying weather application
GU-500SD 400ml 3:1

Epoxy 400ml is strongest chemical anchor in our product range. Remarkable performance at high...

Details
Advance high strength epoxy chemical anchor for concrete mounting system - High temperatures dual component pure epoxy chemical anchor
Advance high strength epoxy chemical anchor for concrete mounting system
GU-500SD 400ml/585ml 3:1

High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality...

Details
400ml dual component manual caulking gun - Cartridge guns - #810
400ml dual component manual caulking gun
#810

#810 caulking gun is a price option for two component epoxy 400ml cartridge with mixing ration...

Details
400ml dual component manual caulking gun - Cartridge guns - G34-400LA
400ml dual component manual caulking gun
G34-400LA

G34-400LA dispenser is heavy-duty and efficient dispensing for 3:1 400ml epoxy adhesive. High...

Details
Mixing nozzle for 1:1 and 3:1 chemical anchor - Static mixer for 1:1 and 3:1 chemical anchor
Mixing nozzle for 1:1 and 3:1 chemical anchor
#818

Static mixer nozzles are applied to adhesive cartridges to mix and dispense two component adhesives....

Details
Files Download
Pure Epoxy Catalogue
Pure Epoxy Catalogue

Bonding strength table on dry concrete by different hole sizes and depth. Especially for big diameter rebars/threaded rods.

Download
GU-500 400ml Pure Epoxy Technical Data Sheet
GU-500 400ml Pure Epoxy Technical Data Sheet

Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure for GU-500 pure epoxy.

Download
GU-500 SGS Tensile Strength Testing Report
GU-500 SGS Tensile Strength Testing Report

Pire epoxy pull out strength report for various bolt sizes on 4000psi concrete according to ASTM E488-96 by SGS lab.

Download
GU-500 AIT Tensile Strength Diameter of 25mm
GU-500 AIT Tensile Strength Diameter of 25mm

Pure epoxy tensile test report of rebar fixing for 25mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...

Download
GU-500 AIT Tensile Strength Diameter of 16mm
GU-500 AIT Tensile Strength Diameter of 16mm

Pure epoxy tensile test report of rebar fixing for 16mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...

Download
Installation Guide
Gallery

400ml epoxy chemical anchor for tropical weather used - High Temperature Epoxy Anchoring Mortar | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including 400ml epoxy chemical anchor for tropical weather used, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.

Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.