150ml Chemical anchors series
150ml is special for DIY household and hardware fastener store. Small volume for one-time disposable using and no special gun required. Used with standard silicon gun.
Easy To Install On The Caulking Gun
Theses 150ml packed chemical anchors are ideally suited for medium load applications, the fastening strength is stronger than the base material itself and as the system is based on chemical adhesion, no load stress is imparted to the base material. Ideal for close to edge fixing, reduced center and group anchoring, fixing machines, threaded studs and handrails, etc.
Specification
- Material: Polyester with styrene (Shelf life: 12 months)
- Material: Epoxy Acrylate with styrene (Shelf life: 18 months)
- Material: Vinylester styrene free (Shelf life: 18 months)
- Size: 150ml
- Mixing ratio: 10:1
- Mixed color: Gray
- Standard package: One cartridge with one mixer and plunger
Features & Benefits
- Available for Polyester, Epoxy Acrylate, Vinylester.
- Used with normal silicon gun. No extra gun needed.
- Small volume for hardware store.
- Completed mixture.
- Low levels of volatile organic compounds (VOC’s) according to LEED test.
- Ideal for small consumption, close to edge fixing, threaded studs, etc.
Photo Gallery
-
150ml Chemical anchor for silicone gun
-
150ml cartridge related products
-
#215-AN 300ml silicone gun for 150ml chemical anchor
-
#215-IHR Revolving barrel caulking gun for 150ml adhesive anchors
-
#215-IHR silicone gun for 150ml chemical bonded anchors
- Products
-
150ml anchoring system polyester chemical anchor
GU-100 150ml
150ml polyester chemical anchor is the smallest volume in the range. It is available to work with ordinary silicone gun, no special extrusion tools required. Polyester...
Details150ml anchor system epoxy acrylate chemical anchor
GU-600 150ml
Single tube 150ml epoxy acrylate chemical anchor is a good option for DIY application. It is easy to install and economical as the cartridge can be applied...
Details150ml injectable vinylester chemical anchor
GU-2000 150ml
150ml vinylester injection chemical anchor is design for DIY fixing market. It is very suitable house repair and building fixing project. A two-component...
Details300ml silicone sealant gun
#215-AN
#215-AN is 1-component and 2-component manual dispenser designed with U-opening steel frame, Ladder hook puller, Pressure Relief Device and Heat treatment...
Details300ml silicone glue gun
#215-IHR
#215-IHR is a lightweight and economical price adhesive dispenser. Excellent design with rotatable 360° frame and convenient ladder hook puller. The material...
Details
150ml Chemical anchors series | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.
Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.