400ml epoxy chemical anchor for tropical weather used

GU-500 400ml 3:1

High Temperature Epoxy Anchoring Mortar

400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer.

Epoxy chemical anchor satisfy the demand for high strength, wide temperature range and nonstandard installation in mostly cases. Outstanding tension tested with anchors by Germany lab according to EAD 330499-00-0601. Epoxy injection mortar can be used indoors or unventilated areas. There is 585ml available in the range.

Inquire Now

Chemical fixing system - Ultimate performance pure epoxy chemical anchor

High-end epoxy mortar for heavy anchoring and critical conditions. In variation case of anchoring work which required higher performance to satisfy and secure the anchoring in dry, wet, uncracked, cracked concrete even in seismic conditions or temperature variation and installation limitation. We tested diverse anchoring condition in ETAG approval lab and with report to compare. Epoxy injectable adhesive anchor is strongest one of bonding fasteners which is growing demands.

Specification of Pure epoxy chemical anchor

● Material: Pure Epoxy
● Model Number: GU-500
● Capacity: 400ml
● Mixing Ratio: 3:1
● Mixed Color: Orange
● Shelf Life: 18 months
● Standard Package: One cartridge with one mixer
● Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Pure epoxy chemical anchor provides longer working time

● Performance testing by ETAG qualified lab according to EAD 330499-00-0601
● Ultimate bonded strength for wide-ranging high performance requests or particular conditions
● Good chemical resistance and better for high and low temperature
● Ideal for deep embedment
● Longer working time and no shrinkage
● Orange color for easy monitoring
● Styrene free, low odor and LEED tested for VOC (Volatile Organic Compounds)
● No health or safety concern to slow down your work

Epoxy anchoring for wall extension, building facades, beam to column connection

High strength epoxy anchoring adhesive can be dispensed at cold and warm temperature. Extensive use in most high strength request for anchoring from new building to old, retrofit or remodel the structure, connect new extension and strengthen present beam. Chemical anchoring is efficient and fast way for strengthening. For large project of dam, bridge, highway, tunnel which is required to use superior epoxy for structural reinforcement.

Injection epoxy mortar for durable and secure anchoring

Non-drip formula, ideal for overhead installation and suspension anchorage. Versatile and multi-purpose pure epoxy is longer curing time and more flexible on applications. As global warming, climate suitability and wide temperature applicability are important for chemical anchor development. We equip temperature facilities to simulate different anchoring temperature worldwide and do multiple testing to ensure the quality. The steady characteristic of epoxy is most used in tropical zone.

How To Use Chemical Anchor Caulking Gun?

1. There is a small trigger on the back of the caulking gun. Press the release trigger with your thumb. This will loosen the long steel rod that runs through the entirety of the frame.　2. Pull the plunger all the way back.　3. Remove the white cap and plug of tube and then screw the mixer nozzle on to the tube. Insert the flat end of the tube into the back of the gun first and put the tube with the mixer nozzle in the front. Pull the handle trigger to move the plungers of caulking gun. Make sure that the plungers of caulking gun are in the center of tube pistons. It is very important to put the tube in the correct position.

All Good Use chemical anchors qualified by IWB lab in Germany and CSTB lab in France

There is no authorized lab for testing bonding anchor in Asia under European Technical Assessment (ETA) regulations. All our chemical anchors are tested according to EAD 330087-01-6001 and EAD 330499-00-0601 for fastener of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.

Anchoring hole depth checking
Sustained loads tested in IWB
Displacement testing under seismic

Technical Data

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

Pressure			Destroy Haul Strength (Kgf/KN)		Safety Haul Strength (Kgf/KN)		Working Standard (mm)
Concrete Strength			4,000 psi	280 kg/cm2	4,000 psi	280 kg/cm2	Hole Diameter	Hole Depth
Rebar No.	＃3	(Φ10)	3,607	36.4	1,202	12.1	13	90
	＃4	(Φ12)	6,409	64.7	2,136	21.6	16	125
	＃5	(Φ16)	9,695	97.9	3,232	32.6	20	145
	＃6	(Φ20)	13,655	137.9	4,552	46.0	25	170
	＃7	(Φ22)	18,672	188.6	6,224	62.9	28	200
	＃8	(Φ25)	24,032	242.7	8,011	80.9	32	225
	＃9	(Φ28)	27,364	276.4	9,121	92.1	37	260
	＃10	(Φ32)	31,730	320.5	10,577	106.8	40	290
	＃11	(Φ36)	35,843	362.1	11,948	120.7	42	320
Remarks:	1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C)	Gelling	Full Curing
5~10	1-2 hr.	90 - 100 hr.
10~20	30-60 min.	30 - 60 hr.
20~30	14-30 min.	14 - 22 hr.
30~40	10-20 min.	6 - 12 hr.
Please make pull off test for at least 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor Size	Hole Diameter (mm)	Hole Depth (mm)	Number of Fixings
Anchor Size	Hole Diameter (mm)	Hole Depth (mm)	400ml
M8	10	80	80
M10	13	90	42
M12	16	120	21
M16	20	145	11
M20	25	170	6
M24	28	210	4
M30	35	270	2
M36	40	330	1
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.