Mixing nozzle for 1:1 and 3:1 chemical anchor
#818
Chemical cartridge static mixer
Static mixer nozzles are applied to adhesive cartridges to mix and dispense two component adhesives. Good Use Hardware designed the mixing nozzles according to the cartridges to ensure both are fit and able to dispense well-mixed adhesives. #818 mixing nozzle is ideal for Good Use chemical anchor with 1:1 and 3:1 mixing ratio.
Specification Of Chemical Anchor Mixing Nozzle
● Item No.: #818
● Suitable for Good Use GU-500 chemical anchor sereis (400ml/585ml/650ml)
● Disposable and easy to replace
How to install chemical anchor?
1. Drill the specific diameter and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed mortar which cannot be used. 4. Inject mixed mortar from the bottom of the drilled hole. 5. Insert and rotate the rebar/threaded rod/steel strip into the drilled hole. Don't touch the insert until full curing. Curing time refer to our TDS. The installation process will affect the bonding performance of chemical anchors.
- Related Products
Mixing nozzle for 10:1 chemical anchor
#817
Mixing nozzle is designed to mix and dispense two-component chemical anchor at the same time....
Details400ml epoxy chemical anchor for tropical weather used
GU-500 400ml 3:1
400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring....
DetailsAdvanced epoxy chemical anchor for varying weather application
GU-500SD 400ml 3:1
Epoxy 400ml is strongest chemical anchor in our product range. Remarkable performance at high...
DetailsAdvance high strength epoxy chemical anchor for concrete mounting system
GU-500SD 400ml/585ml 3:1
High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality...
Details650ml epoxy anchoring adhesive for high temperature installation
GU-500 650ml 1:1
1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country.Two...
Details- Gallery
- Mixing nozzles epoxy resin static mixer for dual pack epoxies
- Extension tubes and mixer nozzle for chemical anchor
Mixing nozzle for 1:1 and 3:1 chemical anchor - Chemical cartridge static mixer | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including Mixing nozzle for 1:1 and 3:1 chemical anchor, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.
Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.