Dia. 15mm black nylon anchor sleeve for hollow brick and block - M8-M10 hollow brick anchors sleeve | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Real nylon, rot-proof, high tensile strength and pressure resistance nylon injection sleeves. Suitable for fixing to perforated or hollow brickwork, concrete and natural stone and dry wall anchor for hollow structures and wallboard applications. Good Use Hardware Co., Ltd. is one of prime Dia. 15mm black nylon anchor sleeve for hollow brick and block - M8-M10 hollow brick anchors sleeve - chemical anchors suppliers based in Taiwan since 1997. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Dia. 15mm black nylon anchor sleeve for hollow brick and block
#819 M15 x 85
M8-M10 hollow brick anchors sleeve
Real nylon, rot-proof, high tensile strength and pressure resistance nylon injection sleeves. Suitable for fixing to perforated or hollow brickwork, concrete and natural stone and dry wall anchor for hollow structures and wallboard applications.
Nylon sleeve for anchoring into hollow substance
When using injection chemical anchor in hollow brick or block, nylon sleeve is essential fixing accessory. Nylon is the material with great chemical resistance and sustainable. The function of nylon sleeve is like a plug to be filled with chemical anchor mortar and hold the loading. Good Use Hardware Co., LTD offer 3 sizes of nylon sleeve for threaded rods from M8 to M14. M15X85 sleeve is for M8-M10 threaded rods. M16X85 sleeve is for M8-M12 threaded rods. M20X85 sleeve is for M12-M14 threaded rods.
Specification Of M15x85 Nylon Sleeve
● Item: #819
● Size: M15X85mm
● Suitable for M8-M10 threaded rod and studs
M15x85 nylon sleeve is easy and quick to install
● Made by corrosion resistant nylon
● No expansion stress in brick
● Non-destructive installation
● Easy and simple to install
● Extensive range for various cost-efficient applications
● Especially suitable for edge fastenings as the underground is not additionally strained by outer radial force
● Anchoring through bonding and form mating between mortar, perforated substrate, anchor rod and underground
Application Of M15x85 Nylon Sleeve
Nylon sleeve is use for chemical fixing to various hollow materials, such as honeycomb brick, perforated sand lime brick, hollow blocks, and perforated stone. The net structure can hold both mortar and rods/anchors to create loding strength in the hollow materials.
How To Install Nylon Sleeve For Hollow Brick?
Drill hole to specified diameter in hollow brick or block using a drill bit. Brush and blow out the dust and insert nylon sleeve into the hole. Dispensing chemical anchor from the bottom of the sleeve and pull back the nozzle little by little to avoide wasting too much mortar in the bottom. Insert threaded rod/stud into the sleeve and let it fully cured.
- Related Products
Dia. 15mm nylon anchor sleeve for hollow brick and block
#819 M15 x 85
M15 x 85mm nylon injection sleeve for chemical anchor fixing on hollow brick. Available in grey,...
Details
Dia. 15mm gray nylon anchor sleeve for hollow brick and block
#819 M15 x 85
Nylon anchors designed to hold anchor bolt an expansion free anchor fixing. Used for hanging...
Details
Dia. 15mm red nylon anchor sleeve for hollow brick and block
#819 M15 x 85
High strong anchoring nylon sleeve for threaded rod on sand-lime solid brick, solid brick,...
Details
Dia. 16mm nylon anchor sleeve for hollow brick and block
#819 M16 x 85
M16x85 nylon sleeve forms a solid plug of adhesive in the brick or block cavity to provide...
Details
Dia. 20mm nylon anchor sleeve for hollow brick and block
#819 M20 x 85
M20x85 nylon sleeve is the biggest size in the range and suitable for M12-M14 threaded rod and studs....
Details- Files Download
- Gallery
Black nylon injection sleeve 15mm
Chemical resin nylon stud sleeve
Injection anchor sleeve with bolt
Plastic injection resin anchor sleeves for M8-M10 studs
Chemical fixation resin for anchoring in hollow materials
Download Popular Products
Dia. 15mm black nylon anchor sleeve for hollow brick and block - M8-M10 hollow brick anchors sleeve | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including Dia. 15mm black nylon anchor sleeve for hollow brick and block, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.
Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.