380ml coaxial cartridge caulking gun
#807N
Manual Coaxial dispenser for 380/410ml co-axial cartridge
#807N manual dispenser is for co-axial 380ml/410ml cartridge. Durable steel frame and high hardness pushing rod which last for long time. High value caulking gun with good price. For high viscosity materials, you can refer to G34-380 dispenser.
Co-axial chemical anchor cartridge caulking gun
This caulking gun is made for 380ml coaxial cartridge chemical anchor. Suitable for Good Use Hardware GU-100 Polyester chemical anchor, GU-600 Epoxy acrylate chemical anchor, and GU-2000 Vinylester chemical anchor as well as other coaxial cartridge adhesive in the market. All components are made in Taiwan and assembled in house with high quality control. Good Use Hardware only provides durable hand tools.
Branding on manual dispenser by logo printing or logo sticker
We can customize your logo on dispenser by many ways. Logo sticker is less cost, time saving, no order quantity limits and flexible design. It also can print on the steel frame directly that will require MOQ and cost increasing. You can make with LOGO, brand name or website on dispenser. Tailor-made color is also acceptable, please offer pantone number to verify the color. We will discuss all details according to your demands and offer best solutions.
- Branding on manual dispenser by logo printing
- Logo sticker on two component manual caulking gun
- Branding on manual caulking applicator trigger
Specification Of 380ml Coaxial Cartridge Caulking Gun
● Item No.: #807N
● For 380ml and 410ml coaxial tube adhesive
● Color: Red
● Thrust ratio: 25:1
● Handle: Aluminum Alloy
● Trigger: Metal
● Carriage: Metal
● Suitable for Good Use 380ml chemical anchor of polyester resin, epoxy acrylaye and vinylester
#807N coaxial chemical anchor dispensing gun is made by high level metal
● Steady quality with competitive price
● Easy installation and operation
● Anti-drip and energy saving design
● High quality for long-term using
● Press the trigger for short time pause or pulling out the steel arm
Standard Packing of #807N coaxial dispensing gun
● 12pcs per carton
● Carton dimension: 49x29x23cm(H)
● N.W.: 12.6KGS
● G.W.: 13.2KGS
How to install chemical anchor?
1. Drill the specific diameter and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed mortar which cannot be used. 4. Inject mixed mortar from the bottom of the drilled hole. 5. Insert and rotate the rebar/threaded rod/steel strip into the drilled hole. Don't touch the insert until full curing. Curing time refer to our TDS. The installation process will affect the bonding performance of chemical anchors.
Maintenance
Store the caulking gun with the plunger head fully retracted, and clean off the spills or leaks immediately to maximize the life of the gun. Our caulking guns are durable if they are well maintenance.
- Related Products
380ml anchoring system polyester chemical anchor
GU-100 380ml
380ml polyester co-axial cartridge chemical anchor also called 400ml or 410ml cartridge in the market....
Details380ml anchor system epoxy acrylate chemical anchor
GU-600 380ml
380ml epoxy acrylate chemical anchor is coaxial cartridge design required special dispensing...
Details380ml injectable vinylester chemical anchor
GU-2000 380ml
380ml fast hardening vinylester chemical anchor is good for hollow brick fixing with anchor...
Details380ml coaxial cartridge caulking gun
G34-380
G34-380 manual dispenser is for 380/410ml co-axial adhesive cartridge with mechanical thrust...
Details- Files Download
Caulking Gun Catalogue
Non-drip single or dual components dispensing caulking gun with specific ratio for sealant.
Download- Installation Guide
- Caulking gun for 380ml coaxial cartridge chemical anchor
- Remove the screw cap from the cartridge
- Screw the mixer nozzle on the cartridge
- Put the cartridge into the caulking gun
- Gallery
- 380ml 10:1 metal coaxial caulking gun
- 380ml coaxial caulk gun cartridge slot
- 380ml push piston coaxial manual epoxy applicator
- 380ml coaxial aluminum alloy trigger
- Caulking gun thumb pressure release
380ml coaxial cartridge caulking gun - Manual Coaxial dispenser for 380/410ml co-axial cartridge | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including 380ml coaxial cartridge caulking gun, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.
Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.