380ml injectable vinylester chemical anchor
GU-2000 380ml
Hollow block anchor sleeve chemical resin
380ml fast hardening vinylester chemical anchor is good for hollow brick fixing with anchor sleeve. It is also called 400ml or 410ml cartridge in the market. It required specific dispenser to go with the coaxial cartridge.
A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 235ml, 345ml and 360ml for diverse market preference.
Chemical fixing system - Fast curing viny lester chemical anchor
The obvious characteristic of vinylester hybrid mortar is fast curing to save installation time and hardening time. We develop diverse curing time to meet different country weather and installation temperature. Fast curing formula is not suitable for nonstandard high temperature which caused curing time accelerated. Please check technical data sheet for safety installation.
Specification Of Vinylester Chemical Anchor
● Material: Vinylester Styrene Free
● Model Number: GU-2000
● Capacity: 380ml
● Mixing Ratio: 10:1
● Mixed Color: Gray
● Shelf Life: 18 months
● Standard Package: One cartridge with one mixer
● Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Vinylester Chemical Anchor Is Suitable For Installation On Vertical Wall
● Fast curing time with high reactivity
● Styrene free and low VOC
● Good acid and alkali resistance
● Long shelf life
● Use with 380ml applicator gun
● ECO friendly building material
Vinylester injection glue anchor with great resistance to industrial chemicals
380ml vinylester injection chemical anchor is packed in 2 component coaxial cartridge. Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer. The injection cartridges are quick and easy to use with the Good Use's dispensers. Partially used cartridges can be reused by simply changing the static mixer. GU-2000 Vinylester chemical grout provides very good resistance to acid and alkali and is suitable for installations at chemical industrial sites.
How to install chemical anchor?
1. Drill the specific diameter and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed mortar which cannot be used. 4. Inject mixed mortar from the bottom of the drilled hole. 5. Insert and rotate the rebar/threaded rod/steel strip into the drilled hole. Don't touch the insert until full curing. Curing time refer to our TDS. The installation process will affect the bonding performance of chemical anchors.
All Good Use chemical anchors qualified by IWB lab in Germany and CSTB lab in France
There is no authorized lab for testing bonding anchor in Asia under European Technical Assessment (ETA) regulations. All our chemical anchors are tested according to EAD 330087-01-6001 and EAD 330499-00-0601 for fastener of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.
- Anchoring hole depth checking
- Sustained loads tested in IWB
- Displacement testing under seismic
Technical Data
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
Pressure | Destroy Haul Strength (Kgf/KN) | Safety Haul Strength (Kgf/KN) | Working Standard (mm) | ||||||
Concrete Strength | 4,000 psi | 280 kg/cm2 | 4,000 psi | 280 kg/cm2 | Hole Diameter | Hole Depth | |||
Rebar No. | #3 | (Φ10) | 3,540 | 35.8 | 1,180 | 11.9 | 13 | 90 | |
#4 | (Φ13) | 5,490 | 55.4 | 1,827 | 18.5 | 16 | 120 | ||
#5 | (Φ16) | 9,060 | 91.5 | 3,020 | 30.5 | 20 | 145 | ||
#6 | (Φ19) | 14,150 | 142.9 | 4,717 | 47.6 | 25 | 170 | ||
#7 | (Φ22) | 18,630 | 188.2 | 6,210 | 62.7 | 28 | 200 | ||
#8 | (Φ25) | 23,195 | 234.3 | 7,732 | 78.1 | 32 | 225 | ||
#9 | (Φ29) | 25,340 | 256.0 | 8,447 | 85.3 | 37 | 250 | ||
#10 | (Φ32) | 32,120 | 324.4 | 10,707 | 108.1 | 40 | 290 | ||
Remarks: | 1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2 |
CHART 2. CURING TIME TABLE
Temperature (°C) | Gelling | Full Curing |
5 | 90 min. | 8 hr. |
10 | 40 min. | 4 hr. |
20 | 18 min. | 1.5 hr. |
30 | 9 min. | 1 hr. |
40 | 6 min. | 1 hr. |
Please make pull off test for at least 24 hours after full cured. |
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
Anchor Size | Hole Diameter (mm) | Hole Depth (mm) | Number of Fixings | ||||
150ml | 235ml | 345ml | 360ml | 380ml | |||
M8 | 10 | 80 | 30 | 47 | 69 | 72 | 76 |
M10 | 12 | 90 | 18 | 29 | 42 | 44 | 47 |
M12 | 14 | 110 | 11 | 17 | 25 | 27 | 28 |
M16 | 18 | 125 | 6 | 9 | 14 | 14 | 15 |
M20 | 24 | 170 | 2 | 4 | 6 | 6 | 6 |
M24 | 28 | 210 | 1 | 2 | 3 | 4 | 4 |
M30 | 35 | 270 | 1 | 1 | 2 | 2 | 2 |
M36 | 40 | 330 | X | 1 | 1 | 1 | 1 |
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature. |
- Related Products
380ml anchoring system polyester chemical anchor
GU-100 380ml
380ml polyester co-axial cartridge chemical anchor also called 400ml or 410ml cartridge in the market....
Details380ml anchor system epoxy acrylate chemical anchor
GU-600 380ml
380ml epoxy acrylate chemical anchor is coaxial cartridge design required special dispensing...
Details150ml injectable vinylester chemical anchor
GU-2000 150ml
150ml vinylester injection chemical anchor is design for DIY fixing market. It is very suitable...
Details235ml injectable vinylester chemical anchor
GU-2000 235ml
235ml vinylester injection chemical anchor mortar is a high performance and rapid curing two-part...
Details345ml injectable vinylester chemical anchor
GU-2000 345ml
345ml vinylester chemical anchor is great for fixing threaded rod and rebar on non-cracked...
Details360ml injectable vinylester chemical anchor
GU-2000 360ml
360ml vinylester chemical anchoring mortar is the most popular resin cartridge system. The fast...
DetailsLow temperature cure injectable vinylester resin
GU-2000 380ml
Vinylester chemical anchor is the solution for cold weather adhesive anchoring applications...
Details380ml coaxial cartridge caulking gun
#807N
#807N manual dispenser is for co-axial 380ml/410ml cartridge. Durable steel frame and high...
Details380ml coaxial cartridge caulking gun
G34-380
G34-380 manual dispenser is for 380/410ml co-axial adhesive cartridge with mechanical thrust...
DetailsMixing nozzle for 10:1 chemical anchor
#817
Mixing nozzle is designed to mix and dispense two-component chemical anchor at the same time....
Details- Files Download
Vinylester Styrene Free Catalogue
Bonding strength chart on dry concrete by different hole size and depth. Vinylester styrene free for all fixing demands.
DownloadGU-2000 Vinylester Styrene Free Technical Data Sheet
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure.
DownloadGU-2000 SGS Tensile Strength Testing Report
Vinylester pull out strength report for diverse bolt size on 4000psi concrete according to ASTM E488-96 by SGS lab.
DownloadGU-2000 AIT Tensile Strength Diameter of 25mm
Vinylester tensile test report of rebar fixing for 25mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
DownloadGU-2000 AIT Tensile Strength Diameter of 16mm
Vinylester tensile test report of rebar fixing for 16mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
Download- Installation Guide
- Caulking gun for 380ml coaxial cartridge chemical anchor
- Remove the screw cap from the cartridge
- Screw the mixer nozzle on the cartridge
- Put the cartridge into the caulking gun
- Gallery
- 380ml cartridge chemical epoxy acrylate styrene resin
- 380ml chemical anchor coaxial tube
- 380ml polyester, epoxy acrylate, vinylester styrene free
- Construction chemical anchor adhesive for structural connection
380ml injectable vinylester chemical anchor - Hollow block anchor sleeve chemical resin | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including 380ml injectable vinylester chemical anchor, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.
Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.