585ml double tube glue gun

HC7-585

Heavy duty dispenser for 2 parts epoxy cartridge 585ml and 385ml

HC7-585 is twin Component applicator for 585ml & 385ml cartridge. Mechanical thrust ratio is 26:1, Stroke 4mm and maximum force 500kgf (4.9kN). Powerful gripping plate for greater durability, easy to release and high viscosity sealant.

Inquire Now

Ratio 3:1 585ml dual component epoxy applicator

There are various dual component cartridge design in the industry. This type epoxy applicator is for 585ml and 385ml cartridge and fit most brand's cartridge. Aluminum alloy handle and steel trigger for day long comfortable use. The push rod with heat treatment chrome plated is strong for cold weather and high viscosity materials.

Branding on manual dispenser by logo printing or logo sticker

We can customize your logo on dispenser by many ways. Logo sticker is less cost, time saving, no order quantity limits and flexible design. It also can print on the steel frame directly that will require MOQ and cost increasing. You can make with LOGO, brand name or website on dispenser. Tailor-made color is also acceptable, please offer pantone number to verify the color. We will discuss all details according to your demands and offer best solutions.

Branding on manual dispenser by logo printing
Logo sticker on two component manual caulking gun
Branding on manual caulking applicator trigger

Specification Of 585ml Double Tube Glue Gun

● Item No.: HC7-585
● For 585ml two-component injection epoxy adhesive
● Color: Black/Blue/Red
● Cartridge ratio: 3:1
● Thrust Ratio: 26:1
● Handle: Aluminum Alloy
● Trigger: Metal
● Carriage: Metal
● Suitable for Good Use 585ml Epoxy chemical anchor

HC7-585 injection cartridge epoxy gun with powerful gripping plate for easy caulking

● Steady quality with competitive price
● Easy installation and operation
● Anti-drip and energy saving design
● Twin gripping plate
● Suitable for high viscosity sealant
● High quality for long-term using
● Press the trigger for short time pause or pulling out the steel arm

Standard Packing of HC7-585 injection epoxy gun

● 10pcs per carton
● Carton dimension: 42x29x38.5cm(H)
● N.W.: 15KGS
● G.W.: 16KGS

How to install chemical anchor?

1. Drill the specific diameter and depth.　2. Clean dust with brush and air blow pump.　3. Press out unmixed mortar which cannot be used.　4. Inject mixed mortar from the bottom of the drilled hole.　5. Insert and rotate the rebar/threaded rod/steel strip into the drilled hole. Don't touch the insert until full curing. Curing time refer to our TDS. The installation process will affect the bonding performance of chemical anchors.

Maintenance

Store the caulking gun with the plunger head fully retracted, and clean off the spills or leaks immediately to maximize the life of the gun. Our caulking guns are durable if they are well maintenance.

Related Products