235ml anchor system epoxy acrylate chemical anchor

GU-600 235ml

Fast gelling time epoxy acrylate anchoring resin

235ml epoxy acrylate chemical anchor is small volume and good for home DIY with quick setting time. It is convenient to operate the bonded anchor system and best selling at hardware store or online shop.

GU-600 injection bonded resin is middle to heavy strength for extensive loads requirements. All of our products had tested and approved in Germany according to EAD 330499-00-0601 which is norm of bonded fasteners for use in concrete. There are also 150ml, 345ml, 360ml and 380ml available in the range.

Inquire Now

Chemical Fixing System - Acid And Alkali-Resisting Epoxy Acrylate Chemical Anchor

For anchoring structural steel connections at specific environment of acid and alkali. We will suggest to apply GU-600 Epoxy acrylate with styrene or GU-2000 without styrene. All of our injectable cartridge mortar tested in European lab to approval the performance on structural connections with post-installed rebar and threaded anchor.

Specification Of Epoxy Acrylate Chemical Anchor

● Material: Epoxy Acrylate with styrene
● Model Number: GU-600
● Capacity: 235ml
● Mixing Ratio: 10:1
● Mixed Color: Gray
● Shelf Life: 18 months
● Standard Package: One cartridge with one mixer
● Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Epoxy acrylate chemical anchor is suitable for overhead installation

● Medium heavy load and economical choice
● Resistance to acid and alkali and low VOC
● Easy and quick to use and less wastage
● Cartridge reusable by simply exchanging static mixer

Fast curing and easy setting two part epoxy acrylate adhesive

GU-600 is a two component adhesive of styrene epoxy acrylate for use in concrete and masonry. It is designed as quick setting and fast curing for high loads fixing and time sensitive applications especially for threaded rod anchoring and rebar dowelling. 235ml epoxy acrylate anchor system has great performance for fixing into hollow materials, prefabricated concrete structures, solid concrete, granite, and natural stone.

How to install chemical anchor?

1. Drill the specific diameter and depth.　2. Clean dust with brush and air blow pump.　3. Press out unmixed mortar which cannot be used.　4. Inject mixed mortar from the bottom of the drilled hole.　5. Insert and rotate the rebar/threaded rod/steel strip into the drilled hole. Don't touch the insert until full curing. Curing time refer to our TDS. The installation process will affect the bonding performance of chemical anchors.

All Good Use chemical anchors qualified by IWB lab in Germany and CSTB lab in France

There is no authorized lab for testing bonding anchor in Asia under European Technical Assessment (ETA) regulations. All our chemical anchors are tested according to EAD 330087-01-6001 and EAD 330499-00-0601 for fastener of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.

Anchoring hole depth checking
Sustained loads tested in IWB
Displacement testing under seismic

Technical Data

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

Pressure			Destroy Haul Strength (Kgf/KN)		Safety Haul Strength (Kgf/KN)		Working Standard (mm)
Concrete Strength			4,000 psi	280 kg/cm2	4,000 psi	280 kg/cm2	Hole Diameter	Hole Depth
Rebar No.	＃3	(Φ10)	3,530	35.7	1,177	11.9	13	90
	＃4	(Φ13)	5,490	55.5	1,830	18.5	16	120
	＃5	(Φ16)	9,070	91.6	3,023	30.5	20	145
	＃6	(Φ19)	14,140	142.8	4,713	47.6	25	170
	＃7	(Φ22)	18,620	188.1	6,207	62.7	28	200
	＃8	(Φ25)	23,185	234.2	7,728	78.1	32	225
	＃9	(Φ29)	25,350	256.1	8,450	85.4	37	250
	＃10	(Φ32)	32,190	325.2	10,730	108.4	40	290
Remarks:	1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C)	Gelling	Full Curing
0~5		6 hr.
5~10	30 min.	5 hr.
10~20	20 min.	4 hr.
20~30	10 min.	2 hr.
30~40	5 min.	40 min.
Please make pull off test for at least 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor Size	Hole Diameter (mm)	Hole Depth (mm)	Number of Fixings
Anchor Size	Hole Diameter (mm)	Hole Depth (mm)	150ml	235ml	345ml	360ml	380ml
M8	10	80	30	47	69	72	76
M10	12	90	18	29	42	44	47
M12	14	110	11	17	25	27	28
M16	18	125	6	9	14	14	15
M20	24	170	2	4	6	6	6
M24	28	210	1	2	3	4	4
M30	35	270	1	1	2	2	2
M36	40	330	X	1	1	1	1
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.