345ml injectable vinylester chemical anchor

GU-2000 345ml

LEED approved chemical injection mortar

345ml vinylester chemical anchor is great for fixing threaded rod and rebar on non-cracked concrete for structure reinforcement. There are also 150ml, 235ml, 360ml and 380ml for diverse market preference.

A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. No styrene contained and VOC approval qualified for eco-friendly and green house.

Inquire Now

Chemical fixing system - Fast curing viny lester chemical anchor

The obvious characteristic of vinylester hybrid mortar is fast curing to save installation time and hardening time. We develop diverse curing time to meet different country weather and installation temperature. Fast curing formula is not suitable for nonstandard high temperature which caused curing time accelerated. Please check technical data sheet for safety installation.

Specification Of Vinylester Chemical Anchor

● Material: Vinylester Styrene Free
● Model Number: GU-2000
● Capacity: 345ml
● Mixing Ratio: 10:1
● Mixed Color: Gray
● Shelf Life: 18 months
● Standard Package: One cartridge with one mixer
● Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Vinylester Chemical Anchor Is Suitable For Indoor Installation

● Maximum flexibility and efficiency
● Fast curing time
● Styrene free and low VOC
● Good resistance to acid and alkali
● Fit to 345ml glue caulk guns
● ECO friendly building material

ECO friendly Vinylester injection hybrid adhesive for indoor installations

Styrene-free 345ml injection vinylester hybrid adhesive has very low odor and is well suited to use for indoor or confined area applications. There is very low VOC content and it can be used without any health concern. Fastening for interior decoration, kitchen and bathroom fittings GU-2000 vinylester hybrid adhesive is the best option.

How to install chemical anchor?

1. Drill the specific diameter and depth.　2. Clean dust with brush and air blow pump.　3. Press out unmixed mortar which cannot be used.　4. Inject mixed mortar from the bottom of the drilled hole.　5. Insert and rotate the rebar/threaded rod/steel strip into the drilled hole. Don't touch the insert until full curing. Curing time refer to our TDS. The installation process will affect the bonding performance of chemical anchors.

All Good Use chemical anchors qualified by IWB lab in Germany and CSTB lab in France

There is no authorized lab for testing bonding anchor in Asia under European Technical Assessment (ETA) regulations. All our chemical anchors are tested according to EAD 330087-01-6001 and EAD 330499-00-0601 for fastener of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.

Anchoring hole depth checking
Sustained loads tested in IWB
Displacement testing under seismic

Technical Data

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

Pressure			Destroy Haul Strength (Kgf/KN)		Safety Haul Strength (Kgf/KN)		Working Standard (mm)
Concrete Strength			4,000 psi	280 kg/cm2	4,000 psi	280 kg/cm2	Hole Diameter	Hole Depth
Rebar No.	＃3	(Φ10)	3,540	35.8	1,180	11.9	13	90
	＃4	(Φ13)	5,490	55.4	1,827	18.5	16	120
	＃5	(Φ16)	9,060	91.5	3,020	30.5	20	145
	＃6	(Φ19)	14,150	142.9	4,717	47.6	25	170
	＃7	(Φ22)	18,630	188.2	6,210	62.7	28	200
	＃8	(Φ25)	23,195	234.3	7,732	78.1	32	225
	＃9	(Φ29)	25,340	256.0	8,447	85.3	37	250
	＃10	(Φ32)	32,120	324.4	10,707	108.1	40	290
Remarks:	1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C)	Gelling	Full Curing
5	90 min.	8 hr.
10	40 min.	4 hr.
20	18 min.	1.5 hr.
30	9 min.	1 hr.
40	6 min.	1 hr.
Please make pull off test for at least 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor Size	Hole Diameter (mm)	Hole Depth (mm)	Number of Fixings
Anchor Size	Hole Diameter (mm)	Hole Depth (mm)	150ml	235ml	345ml	360ml	380ml
M8	10	80	30	47	69	72	76
M10	12	90	18	29	42	44	47
M12	14	110	11	17	25	27	28
M16	18	125	6	9	14	14	15
M20	24	170	2	4	6	6	6
M24	28	210	1	2	3	4	4
M30	35	270	1	1	2	2	2
M36	40	330	X	1	1	1	1
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.