Home use chemical fixing glue
GU-2000 150ml Vinylester Chemical Anchor
Easy and fast for all fixings, everyone can do it easily
When do hanging fixing, it's easy to add strength by chemical anchor. 150ml Vinlyester chemical anchor is a great option for house DIY works. Traditional way of fixing is using expansion bolt for direct fixing, but when time goes by, the fixing would loose its strength and cause safety issue like collapse, especially for heavy hanging. You must not want an extra job for repair that is costly and will damage the concrete. Take a little time to employ bolt with bonding adhesive for all fixing to ensure durability and safety.
Where can chemical glue be used?
There are so many places you can use chemical adhesive for fixings. For instance fixing the handrail, setting sunlight awning, grounding aluminum track, install air conditioner, decorate the garden which all use fasteners for fixings. Directly fixing fasteners like expansion bolt or wall plug are mechanical design to grip the concrete which is easy to use but not for heavy weight load or long durability. On the contrary, the adhesive grouting the concrete hole and bolt seamless will ensure full connection for both materials and bring much more bonding strength.
- Chemical fixing glue fasten the sunlight awning
- Chemical adhesive for fixing air conditioner
- Fixing adhesive anchoring balcony fencing
- Hanging track rail by chemical anchor glue
How to install chemical anchor?
Drill the concrete with specific depth according to technical instruction of each size of rebar and threaded rod. Clean the drilled hole certainly with steel brush and air pump. The dust in the hole also cause strength reduced. Assemble injectable glue cartridge on caulking gun, press out unmixed resin which is white color and can't be used. When the mixed resin become grey, inject into the hole start from hole bottom. Rotate the rebar into the hole which insure glue fully adhered with the thread of rebar. Wait for full hardened before weight loading.
What is the fixing strength of chemical glue?
The strength of rebar, concrete and chemical glue are the key factor of outcome. If one of them is low strength, the result strength is limited. For example, when rebar grade is low which may cause rebar break that can't reach maximum bonding strength. If concrete psi level is not strong enough that will lead to concrete broken. So when you know what fixing strength is required, should consider these 3 materials matching well. Below chart is reference bonding strength by diverse rebar size under specific hole diameter and hole depth.
Pressure | Destroy Haul Strength (Kgf/KN) | Safety Haul Strength (Kgf/KN) | Working Standard (mm) | ||||||
Concrete Strength | 4,000 psi | 280 kg/cm2 | 4,000 psi | 280 kg/cm2 | Hole Diameter | Hole Depth | |||
Rebar No. | #3 | (Φ10) | 3,540 | 35.8 | 1,180 | 11.9 | 13 | 90 | |
#4 | (Φ13) | 5,490 | 55.4 | 1,827 | 18.5 | 16 | 120 | ||
#5 | (Φ16) | 9,060 | 91.5 | 3,020 | 30.5 | 20 | 145 | ||
#6 | (Φ19) | 14,150 | 142.9 | 4,717 | 47.6 | 25 | 170 | ||
#7 | (Φ22) | 18,630 | 188.2 | 6,210 | 62.7 | 28 | 200 | ||
#8 | (Φ25) | 23,195 | 234.3 | 7,732 | 78.1 | 32 | 225 | ||
#9 | (Φ29) | 25,340 | 256.0 | 8,447 | 85.3 | 37 | 250 | ||
#10 | (Φ32) | 32,120 | 324.4 | 10,707 | 108.1 | 40 | 290 | ||
Remarks: | 1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2 |
Quality Certified Chemical Fixing In Germany
With more than 25 years experience and reputation, our chemical anchor also tested in many lab of different country per market demands. Quality approval of SGS, Germany IWB lab, Thailand AIT lab as well as environmental friendly certificate of VOC and LEED. Our factory is licensed factory of chemical anchor with government acknowledged. It's important to use the product make by legal factory and with quality certificate. Because every small fixing turn into stronger building and it's concerning personal safety.
- Low VOC chemical anchors
- Low VOC content according to LEED regulation
- Thailand bonding strength test by AIT lab
- Taiwan bonding strength test by SGS lab
- European bonding strength test by ETAG qualified lab
How To Order In Small Quantities?
Click the links below to know more about Good Use hardware's online order, or send us an email and our sales team will provide you suitable item and estimated shipping cost. There are ways of payment and delivery that you can choose according to your demands.
- Related Products
150ml anchoring system polyester chemical anchor
GU-100 150ml
150ml polyester chemical anchor is the smallest volume in the range. It is available to work...
Details150ml anchor system epoxy acrylate chemical anchor
GU-600 150ml
Single tube 150ml epoxy acrylate chemical anchor is a good option for DIY application. It is easy...
Details235ml injectable vinylester chemical anchor
GU-2000 235ml
235ml vinylester injection chemical anchor mortar is a high performance and rapid curing two-part...
Details345ml injectable vinylester chemical anchor
GU-2000 345ml
345ml vinylester chemical anchor is great for fixing threaded rod and rebar on non-cracked...
Details360ml injectable vinylester chemical anchor
GU-2000 360ml
360ml vinylester chemical anchoring mortar is the most popular resin cartridge system. The fast...
Details380ml injectable vinylester chemical anchor
GU-2000 380ml
380ml fast hardening vinylester chemical anchor is good for hollow brick fixing with anchor...
DetailsLow temperature cure injectable vinylester resin
GU-2000 380ml
Vinylester chemical anchor is the solution for cold weather adhesive anchoring applications...
Details300ml silicone sealant gun
#215-AN
#215-AN is 1-component and 2-component manual dispenser designed with U-opening steel frame,...
Details300ml silicone glue gun
#215-IHR
#215-IHR is a lightweight and economical price adhesive dispenser. Excellent design with rotatable...
Details360ml two component caulking gun
#811N
#811N is multi compatible dispenser for 300/345/360ml adhesive cartridge and some customers...
DetailsMixing nozzle for 10:1 chemical anchor
#817
Mixing nozzle is designed to mix and dispense two-component chemical anchor at the same time....
Details- Files Download
Vinylester Styrene Free Catalogue
Bonding strength chart on dry concrete by different hole size and depth. Vinylester styrene free for all fixing demands.
DownloadGU-2000 Vinylester Styrene Free Technical Data Sheet
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure.
DownloadGU-2000 SGS Tensile Strength Testing Report
Vinylester pull out strength report for diverse bolt size on 4000psi concrete according to ASTM E488-96 by SGS lab.
DownloadGU-2000 AIT Tensile Strength Diameter of 25mm
Vinylester tensile test report of rebar fixing for 25mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
DownloadGU-2000 AIT Tensile Strength Diameter of 16mm
Vinylester tensile test report of rebar fixing for 16mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
Download- Installation Guide
- Silicone gun for 150ml chemcial anchor injection cartridge
- Remove the screw cap from the cartridge
- Screw the mixer nozzle on the cartridge
- Put the cartridge into the caulking gun
- Gallery
- Vinylester 150ml cartridge with plunger
- 150ml vinylester styrene free resin
- 150ml chemical anchor coaxial tube
- 150ml polyester, epoxy acrylate, vinylester styrene free
- Injectable vinylester with styrene free for DIY anchors
Home use chemical fixing glue - Easy and fast for all fixings, everyone can do it easily | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including Home use chemical fixing glue, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.
Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.